DFW35 Static Torque Transducer from Inscale

DFW35 STATIC TORQUE
TRANSDUCER
0.2% Accuracy Class
IP50 Protection

PERFORMANCE BACK

The Lorenz DFW35 series of Static Torque Transducers are well designed for all types of torque measurement applications. This series has a female and male keyed drives to enable the transducer to located correctly.

We are happy to design variants of this transducer to meet your specific requirements, please contact our sales department with your requirements.

The DFW35 series is supplied with a standard IP50 rating and is available in torque ranges from 12Nm up to 2,000Nm.

SPECIFICATION

MODEL	CAPACITY	SIZE in mm

DFW-35/M312	12Nm	L=70, OD=70
DFW-35/M325	25Nm	L=70 OD=70
DFW-35/M363	63Nm	L=70, OD=70
DFW-35/M416	160Nm	L=90, OD=80
DFW-35/M450	500Nm	L=120, OD=100
DFW-35/M510	1,000Nm	L=140 OD=120
DFW-35/M520	2,000Nm	L=180 OD=145

DATA
Excitation Voltage:	2-12 Vdc
Sensitivity (Rated Output):	1mV/V nominal
Service Torque:	130 % v.E
Limit Torque:	150 % v.E
Ultimate Torque:	>300 % v.E
Max. Dynamic Load:	70 % v.E
Bridge Resistance:	350 Ω
Nominal Temperature Range:	-5 to 45°C
Service Temperature Range:	-15 to 55°C
Twist angle by nominal load:	<0.2°
Level of Protection: (DIN 40 050)	IP50
Electrical Connections:	6 pin connector Details on request

Outline Drawing
(not available)

What you get for your money

Inscale Quality Assurance
2 Year Warranty
Re-calibration Service
Free Inspection Service
Full Technical assistance
FREE DELIVERY IN THE UK

Options: Interface amplifiers, Calibration control and accuracy class 0.1% v.E.

DELIVERY IS EX-STOCK
SUBJECT TO AVAILABILITY AT TIME OF ORDER AND PAYMENT TERMS.

Prices subject to currency exchange rate. Quotations available on request please use enquiry form.

Delivery is Free in the UK, international delivery is available at cost (see enquiry form for more details)

Š2003 Inscale Š2003 Inscale