DR2337 Rotating Torque Transducer from Inscale

DR2337 ROTATING TORQUE
TRANSDUCER - CONTACTLESS
0.1% Accuracy Class
Contactless, Digital Signal Transmission
Maintenance Free
Dynamic (5k samples)
High Signal Active (ą5V) or Serial (RS485)
High Resolution (ą15 Bit)

PERFORMANCE BACK

The Lorenz DR2337 series of Contactless Rotating Torque Transducers are well designed for high performance torque measurement applications. This series has flanges to enable the transducer to be located correctly.

We are happy to design variants of this transducer to meet your specific requirements, please contact our sales department with your requirements.

The DR2337 series is supplied with a standard IP50 rating, RS485 Interface and is available in torque ranges from 50Nm up to 5,000Nm.

SPECIFICATION

MODEL	CAPACITY	SIZE in mm

DR-2337	50Nm	See drawings
DR-2337	100Nm	See drawings
DR-2337	200Nm	See drawings
DR-2337	500Nm	See drawings
DR-2337	1,000Nm	See drawings
DR-2337	2,000Nm	See drawings
DR-2337	5,000Nm	See drawings
DR-2337	10,000Nm	See drawings

DATA
Excitation Voltage:	12-27 Vdc (current <500mA)
Non-repeatability:	ą0.02 %
Output Signal:	ą0 - 5V
Output Current max:	5mA Short Circuit resist.
Reading Rate:	5kHz
Service Torque:	130 % v.E
Limit Torque:	200 % v.E
Ultimate Torque:	>300 % v.E
Bandwidth:	70 %
Nominal Temperature Range:	5 to 45°C
Service Temperature Range:	0 to 60°C
Temperature Coefficient of sensitivity:	+0.01 % v.E/k
Temperature Coefficient of zero:	ą0.02 % v.E/k
Level of Protection: (DIN 40 050)	IP54

Electrical Connections:	12 pin connector Pin A = Angle Ch 0 Pin B = Angle Ch B (TTL)(option) Pin C = Signal ą5V Pin D = Signal 0V Pin E = Excitation (GND) - 0V Pin F = Excitation 12 to 27V Pin G = Angle Ch A (TTL)(option) Pin H = NC Pin J = RS485 (+) Pin K = Calibration Control Pin L = RS485 (-) Pin M = Housing
This type has a Contactless and digital signal transmission from shaft to case, that means no failure of transmission and maintenance free.

Outline Drawing
(not available)

What you get for your money

Inscale Quality Assurance
2 Year Warranty
Re-calibration Service
Free Inspection Service
Full Technical assistance
FREE DELIVERY IN THE UK

DELIVERY IS EX-STOCK
SUBJECT TO AVAILABILITY AT TIME OF ORDER AND PAYMENT TERMS.

Prices subject to currency exchange rate. Quotations available on request please use enquiry form.

Delivery is Free in the UK, international delivery is available at cost (see enquiry form for more details)

Š2003 Inscale Š2003 Inscale