DR2412 Rotating Torque Transducer from Inscale

DR2412 ROTATING TORQUE
TRANSDUCER - CONTACTLESS
0.1% Accuracy Class
RS485 Interface

PERFORMANCE

The Lorenz DR2412 series of Rotating Torque Contactless Transducers are well designed for all types of torque measurement applications. This series has male drives to enable the transducer to be located correctly.

We are happy to design variants of this transducer to meet your specific requirements, please contact our sales department with your requirements.

The DR2412 series is supplied with a standard IP50 rating, RS485 Interface and is available in torque ranges from 0.03Nm up to 20,000Nm.

SPECIFICATION

MODEL	CAPACITY	SIZE in mm

DR-2412/M030	0.03Nm	L=65, H=50, W=32
DR-2412/M050	0.05Nm	L=65, H=50, W=32
DR-2412/M110	0.1Nm	L=85, H=50, W=32
DR-2412/M120	0.2Nm	L=85, H=50, W=32
DR-2412/M150	0.5Nm	L=85, H=50, W=32
DR-2412/M210	1Nm	L=85, H=50, W=32
DR-2412/M220	2Nm	L=85, H=50, W=32
DR-2412/M250	5Nm	L=85, H=50, W=32
DR-2412/M310	10Nm	L=85, H=50, W=32
DR-2412/M315	15Nm	L=85, H=50, W=32
DR-2412/M320	20Nm	L=111.5, H=59, W=40
DR-2412/M330	30Nm	L=111.5, H=59, W=40
DR-2412/M350	50Nm	L=147.5, H=59, W=40
DR-2412/M410	100Nm	L=147.5, H=59, W=40
DR-2412/M420	200Nm	L=159.5, H=76, W=58
DR-2412/M450	500Nm	L=159.5, H=76, W=58
DR-2412/M510	1,000Nm	L=262, H=136, W=115
DR-2412/M520	2,000Nm	L=377, H=161, W=139
DR-2412/M550	5,000Nm	L=377, H=161, W=139
DR-2412/M610	10,000Nm	L=450, H=233, W=208
DR-2412/M620	20,000Nm	L=450, H=233, W=208

DATA
Excitation Voltage:	12-16 Vdc (current <60mA)
Non-repeatability:	ą0.02 %
Output signal:	ą 11 Bit
Service Torque:	150 % v.E
Limit Torque:	200 % v.E
Ultimate Torque:	>300 % v.E
Bandwidth:	70 %
Nominal Temperature Range:	5 to 45°C
Service Temperature Range:	0 to 60°C
Temperature Coefficient of sensitivity:	+0.01 % v.E/k
Temperature Coefficient of zero:	ą0.02 % v.E/k
Level of Protection: (DIN 40 050)	IP50

Electrical Connections:	12 pin connector Pin A = NC Pin B = Angle B (TTL) Pin C = NC Pin D = NC Pin E = Excitation (GND) - 0V Pin F = Excitation 12 to 16V Pin G = Angle A (TTL) Pin H = NC Pin J = RS485 - Pin K = NC Pin L = RS485 + Pin M = Housing
This type has a Contactless and digital signal transmission from shaft to case, that means no failure of transmission and maintenance free.

Outline Drawing
(not available)

What you get for your money

Inscale Quality Assurance
2 Year Warranty
Re-calibration Service
Free Inspection Service
Full Technical assistance
FREE DELIVERY IN THE UK

DELIVERY IS EX-STOCK
SUBJECT TO AVAILABILITY AT TIME OF ORDER AND PAYMENT TERMS.

Prices subject to currency exchange rate. Quotations available on request please use enquiry form.

Delivery is Free in the UK, international delivery is available at cost (see enquiry form for more details)

Š2003 Inscale Š2003 Inscale